Garage Door Supplier near me – Replacing Glass

Image result for garage door repairIf you have kids or there are kids in your neighborhood, you can be sure that sooner or later you will have to be thinking about this kind of garage door repair. The good news is that replacing broken glass in a wooden frame is quite easy, and you can get things done very fast. There is one crucial detail to remember though: you have to make sure to wear gloves at all times so that you won’t be injured.Do you want to learn more? Visit Garage Door Supplier near me.

Start on the outside

Begin with removing the loose pieces of glass from the outside. To get rid of all the pieces, you might have to use a putty knife to loosen the glazing compound around the edge. You could also use a small chisel for this purpose. In case this doesn’t work, try heating it with a heat gun or a blow drier. If none of these methods work, you could apply some linseed oil and let it set to soften the glazing.

Remove all the glass

Image result for garage door repairOnce the glazing has softened, you should remove all the glass pieces. Also make sure that you remove the remaining putty and paint from the frame. Clean everything up otherwise the new materials won’t stick to the surface. If there is any wood left bare, you should prime it to protect it against the elements.

Size matters in garage door repair

Measure the height and the width of the window opening and subtract 0.125 inch from each. Then move on to measuring the thickness of the glass. Once you have all of this information, just head it to the glass store or home improvement store to get a new pane.

Frame the glass

Make sure that the primer you applied has dried before you start working. Use glazing compound to make a thin rope and press it into the frame. Put the new pane into its place and gently press around the edges. This way you can make sure that the glass sticks to the glazing. You can use a putty knife to help you. Although you have to apply some pressure, make sure that it’s not too much so that you won’t break the glass.

Finishing touches

In the end apply some more glazing around the edges. To make it look more appealing, you should smooth it with a putty knife held at an angle. It takes about a week for the putty to dry entirely. Once this happens, you can prime the putty like the rest of the wood and paint it to match the garage door.

You may also like...